KNEHO UV coatings for the furniture industry

Individual customer solution for furniture

With the products from KNEHO-LACKE, you can achieve highly modern effects such as "dull matt" or "anti-fingerprint effect" with the demanding requirements that kitchen furniture demands.

Despite hot vapors, coffee stains and scratches, the furniture retains its beautiful, high-quality lacquer surfaces after many years of use.


KNEHO-EXCIMER-LACQUER

KNEHO EXCIMER VARNISH is applied as a top coat and cured using EXCIMER technology to create a super-soft surface.  EXCIMER-LACK can be applied by rolling, casting and in some cases even by spraying.

  • Velvety, matt and transparent surface
  • Anti-fingerprint effect
  • Super soft effect
  • Excellent scratch resistance of lacquered surfaces.

KNEHO-HYDRO-FILLER ONE

The KNEHO-HYDRO-FILLER ONE is only applied once to MDF with the airless gun, after drying the top coat can be applied directly. This can even be done with LOW DENSITY MDF with careful pre-treatment.

  • Only one coat
  • Super stability on upright edges
  • Applications up to 250 g/m² possible
  • Good sandability
  • Suitable for damp rooms

KNEHO-HYDRO MULTI-COAT LACQUER ANTIBACTERIAL

The KNEHO-HYDRO-MULTI-LAYER COATING ANTIBACTERIAL is applied once. The surface has a certified antibacterial effect and meets the requirements of the Hohenstein Institute. Very suitable for handrails and armrests in hospitals and care facilities.

  • Very transparent
  • 2-component processable
  • Very good chemical and mechanical properties
  • Suitable for damp rooms

KNEHO-HYDRO-MOISTURIZING VARNISH for pine

KNEHO-HYDRO-MOISTURIZING VARNISH FOR PINE is applied twice to pine. The special feature of the product is its very good color stability and the barrier against escaping resin, even on resin-rich knots there is very good long-term adhesion.

  • Very good adhesion
  • Available in various gloss levels
  • Good sandability
  • Suitable for damp rooms

KNEHO-HYDRO-UV-HARDWAX-OIL GLOSS 5

KNEHO-HYDRO HARTWACHSÖL is particularly scratch-resistant and is therefore extremely suitable for furniture and tables. The hard wax oil impresses with its very good transparency and pleasant feel.

  • Super scratch-resistant
  • Velvety surface
  • Can be refinished
  • For the highest demands

KNEHO-HYDRO-UV-MEHRSCHICHTLACK GLANZ 3 with hardener in a mixing ratio of 10:1

The KNEHO-HYDRO-UV-MEHRSCHICHTLACK GLANZ 3 is absolutely insensitive to micro-scratches and shiny mechanical stress.

  • Super scratch resistant
  • Velvety surface
  • For the highest demands

KNEHO-NATURAL-UV-OIL

KNEHO-NATUR-UV-ÖL is applied twice with a paint application roller and hardened under UV radiation. The surface is naturally oiled and can be refreshed with all commercially available care products. The surface is suitable for kitchen worktops and parquet floors.

  • Scorching
  • Can be refinished
  • For heavy-duty use in the kitchen
  • Open-pored

KNEHO-NAWA-UV-OIL FOR ROLLING

KNEHO-NAWA-UV-OIL FOR ROLLING is an innovative product made from 90% renewable sources, which significantly improves the eco-balance of your products.

  • good scratch resistance
  • Pleasant surface feel
  • For heavy-duty use

KNEHO-UV TOPCOAT ANTI-FINGERPRINT GLOSS 3

The KNEHO UV TOP COAT ANTIFINGERPRINT GLANZ 3 is applied once as a thin top coat. The result is a very velvety matt surface with an anti-fingerprint effect. The varnish can be used on all substrates in conjunction with a UV primer or a UV adhesion primer.

  • Pleasant surface
  • Super matt
  • Anti-fingerprint effect

HYDRO-UV-DECKALCK SUPERMATT

The new generation of HYDRO-UV-DECKALCK SUPERMATT has been specially developed for the requirements of table tops. The lacquer is characterized by very good scratch resistance, high durability and an elegant feel. Today, we create a very natural surface finish and use many modern, renewable and recycled ingredients.

  • Scratch resistant
  • Durable
  • Elegant, velvety feel

REALWOOD TECHNOLOGY

With REALWOOD TECHNOLOGY, modern surface classics such as "ash-white" or "oak-black" can be generated on doors or furniture without using veneer. The wood grain is so natural that there is no difference to a conventional veneered surface.  There is complete design freedom in the orientation of the grain, whether floral or striped, and the number and appearance of knots and cracks. In addition, the economic aspects are particularly convincing.

  • Natural wood grain without veneer
  • Simple implementation in production processes
  • Suitable for large series
  • Cost-effective compared to classic production methods

Contact your UV coating specialist now

We look forward to your inquiry

Kontaktformular


Your contact person


Marco Robbes 

E-Mail: robbes@kneho.com
Mobile: +49 (0) 170 991 45 48